All the beams that make up our bioclimatic pergolas are 6060 first fusion aluminium
We have different profiles that allow our columns to achieve different support capacities according to the dimensions.
The longest length of a profile is 6250mm and can give a distance of 6000mm between columns.
We have two blade profiles that shall give flexibility in the design. Both blades have double walls to provide high stress resistance to snow or wind.
Our standard blades can go up to 3000mm long with a weight of 15kg per m2.
Our XL blades can go up to 3500mm long with a weight 18kg per m2 (This can give an overall width including the frame of 3900mm.)
The maximum module surface is limited to 16m2.
The posts can be made at heights to meet your requirements and therefore allowing a totally flexible design.
The following values have been recorded for rain wind and snow.
The Rain drainage 230mm/h
Wind resistance 180Km/h
Snow Load 300kg/m2
Each pergola is custom prepared and has the original France Guarantee certificate.
A testing of quality for the powder coating process. This gives the following benefits.
High UV resistance
Better Colour retention
Good resistance to chemical products.
This is a pre lacquering aluminium surface preparation for seaside installations. Qualimarine is also highly recommended for heavily polluted industrial areas.
Aluminium parts i.e. blades and frame 10 years
Operating mechanisms and motors 3 years
Electronics 2 years
Labour shall be charged for the replacement of components should they be required to be replaced
Use a sponge with soapy water or a non-corrosive cleaning product to clean the system.
Clean the inside of the frames and ensure the gutters are free from leaves.
Regularly check the condition of the seals, pins, rollers and screw tension.
We shall be pleased to offer a maintenance agreement if you require.